Sunprofit en Windows 7
10 jaren 5 maanden geleden - 10 jaren 5 maanden geleden #398
door MarcoD
Beantwoord door MarcoD in topic Sunprofit en Windows 7
Dear Kai,
Thank you for your reply. In my case the ploblem rose when I migrated to complete different computer hardware and OS. After this I put everything back to the old situation, and I haven't had the time (and patience and courage
) so far to troubleshoot further. I'm using two soladin 600 inverters connected with two what appear exactly the same USB/serial adapters, which I purchased about 1.5 yaers after each other from DealExtreme
. I had a lot of trouble to get these running under Win7 and for the oldest one ( purchased september 2011) I had to use a realy old version Prolific driver which I found on the internet. So apparently they are not the same on the inside. I also discoverred that a lot of these cheap chinese adapters are using fake Profilic chips, although they claim to be original, and the chips have Prolific type numbers printed on it. However, they worked fine for years since I started using them under WinXP.
Anyway, could you please let me know which brand and type USB to serial adapter you are using now with your Sunprofit setup, and if possible give me a link to where i could order it? I hope to start testing again with Win7 soon (I have to clean my network from WinXP sometime), using your hints and all the effort Minke B and other users have put in since I posted my problem. I will keep everyone informed as soon I have new information.
Thanks a lot
Thank you for your reply. In my case the ploblem rose when I migrated to complete different computer hardware and OS. After this I put everything back to the old situation, and I haven't had the time (and patience and courage
) so far to troubleshoot further. I'm using two soladin 600 inverters connected with two what appear exactly the same USB/serial adapters, which I purchased about 1.5 yaers after each other from DealExtreme
. I had a lot of trouble to get these running under Win7 and for the oldest one ( purchased september 2011) I had to use a realy old version Prolific driver which I found on the internet. So apparently they are not the same on the inside. I also discoverred that a lot of these cheap chinese adapters are using fake Profilic chips, although they claim to be original, and the chips have Prolific type numbers printed on it. However, they worked fine for years since I started using them under WinXP.Anyway, could you please let me know which brand and type USB to serial adapter you are using now with your Sunprofit setup, and if possible give me a link to where i could order it? I hope to start testing again with Win7 soon (I have to clean my network from WinXP sometime), using your hints and all the effort Minke B and other users have put in since I posted my problem. I will keep everyone informed as soon I have new information.
Thanks a lot
10 jaren 5 maanden geleden #396
door Ontwikkeling
Beantwoord door Ontwikkeling in topic Sunprofit en Windows 7
Ich schicke dir einen Link für den letzten Bèta-version vom Software.
Vielleicht hilft dir das.
Bitte las es mir wissen ob es klappt.
Vielleicht hilft dir das.
Bitte las es mir wissen ob es klappt.
10 jaren 5 maanden geleden #395
door Killerkai
Beantwoord door Killerkai in topic Sunprofit en Windows 7
Ja, ich habe es zum ersten mal installiert unter Windows7 64-bit.
Die Standard-Runtimes (.net und vcredist) sind alle installiert.
Die Meldung kommt auch nur wenn der Soladin schon verbunden ist - Ist das RS232-Kabel nicht eingesteckt kommt "Verbindungsfehler", das sieht aber normal aus.
Leider kann ich die Software nicht zum laufen bekommen
Würde sie so gerne benutzen..
Bin für jede Hilfe dankbar.
Groeten uit Duitsland
Kai
Die Standard-Runtimes (.net und vcredist) sind alle installiert.
Die Meldung kommt auch nur wenn der Soladin schon verbunden ist - Ist das RS232-Kabel nicht eingesteckt kommt "Verbindungsfehler", das sieht aber normal aus.
Leider kann ich die Software nicht zum laufen bekommen
Würde sie so gerne benutzen..
Bin für jede Hilfe dankbar.
Groeten uit Duitsland
Kai
Tijd voor maken pagina: 0.152 seconden
